Completed fabrication, assembly, and prep for the rudder. Need to pick up some pro-seal from Van’s to glue up the trailing edge and fix the trailing stiffeners together to finish the riveting.
ready for final assembly of the rudder
![]() |
ready to rivet the rudder together |
![]() |
fitting the rudder skins to the subframe |
![]() |
plans and parts |
![]() |
deburring holes |
![]() |
Missy thought this was hilarious ;) |
![]() |
getting finished parts ready for priming |
![]() |
finished rudder parts |
![]() |
GBP 988... dries in a couple of minuets... sure stinks though |
![]() |
snips make for some artistic shapes out of aluminum scrap |
![]() |
this is a critical part that joins the trailing edge of the rudder skins |